Wcs Jobshop Tue, 07 Jan 2014 17:43:04 +0000 en-US hourly 1 http://wordpress.org/?v=3.9.2 we are sponsors of Kaser Motor Sports /examples/we-are-sponsors-of-kaser-motor-sports/?utm_source=rss&utm_medium=rss&utm_campaign=we-are-sponsors-of-kaser-motor-sports /examples/we-are-sponsors-of-kaser-motor-sports/#comments Thu, 11 Jul 2013 15:23:32 +0000 /?p=876 We are proud to Sponsor Jaser Kaser and Kaser Motor Sports for the 2012 and 2013 Racing Seasons.  We will be providing the team with Machined parts as well as laser and Waterjet cut parts. Congratulations need to go out to Jase he is currently leading the NWAAS Nebraska state points, leading JMS track points, and 2nd in I-80 track points. We have made many parts for Kaser motor sports here are a few 3d models of them

Jase Kaser Racing

Shock Mount made for Kaser Motor sports


http://www.jasekaser.com

Bracket 3d model

 

 

Race Car clevis

 

]]>
/examples/we-are-sponsors-of-kaser-motor-sports/feed/ 0
Job Opening for a Press Brake Operator /job-openings/press-brake-operator/?utm_source=rss&utm_medium=rss&utm_campaign=press-brake-operator /job-openings/press-brake-operator/#comments Sun, 01 Jul 2012 21:05:58 +0000 /?p=826

Bending Large sheet metal using a crane to take most of the weight

The CNC Press Brake Operator is responsible for the  operation of the press brake machine and associated equipment.

This Job is now filled

The duties associated with this job include but are not limited to:
•       Receive the daily production plan from the production supervisor
•       Setup and operate CNC and Manual Press brakes
•       Set up jobs according to work order priority in ERP or as instructed by supervisor
•       Use ERP interface to read drawings and work instructions
•       Sort and stage WIP and Finished Goods for subsequent operations
•       Product labeling
•       Quality Inspection on all parts produced on the press brake, including documentation of measured dimensions according to the Company documents and
procedures
•       Inventory management both physically and electronically (WCS ERP)
•       Communicating with production control supervisor and other operators to ensure material flow/throughput is maintained
•       Daily, weekly and monthly machine maintenance for second shift, including
the proper use and care of punches and dies.  Responsible for documenting and
communicating any problems found during maintenance routine

Requirements and Qualifications
•       Must possess a High School Diploma or GED Equivalent
•       The ability to operate, set up, and program the CNC press brake is strongly
preferred
•       Basic math skills required
•       Basic Computer (PC) skills in a Windows environment required
•       Must be able to lift 70 lbs (35 Kg) independently
•       Must be able to walk easily around the machinery and materials and on rough
terrain
•       Must be able to read and interpret engineering prints and dimensions including metric measurements
•       Must be able to use inspection and measuring equipment to verify critical
dimensional requirements
•       Must have or be able to attain a fork lift certification
•       Must have good written and oral communication
•       Must be willing and able to wear all prescribed personal protective equipment (PPE) including but not limited to hard hat, protective eyewear, hearing protection, protective clothing (uniform will be supplied), protective gloves and safety shoes
•       Must maintain a neat and orderly workplace
•       Responsible for preventing damage to equipment and facilities in order to
insure uninterrupted service to the customers
•       Must be a team player who is willing to do other assignments as needed

Education/Experience:
HS/GED
1-3 years experience

Please email Resumes to emartin@wcsjobshop.com

]]>
/job-openings/press-brake-operator/feed/ 0
Welding in Lincoln Nebraska /examples/welding-in-lincoln-nebraska/?utm_source=rss&utm_medium=rss&utm_campaign=welding-in-lincoln-nebraska /examples/welding-in-lincoln-nebraska/#comments Sun, 01 Jul 2012 20:33:56 +0000 /?p=820 This is a video that shows Custom fabrication and Welding small parts in Lincoln Nebraska while listening to Beethoven

 

We are a Job shop located in Lincoln Nebraska.

We are right in the center of the country. We have many different things we can do for you. Some of our equipment include CNC Machining centers, CNC Turning Centers, CNC Saws, 4000 watt Laser 5′ x 10′, Water Jet 6′ x 12′, CNC Press Brake 250 ton, and many more. We also have in house powder coating, Welding and an assembly dept. If you would like to get a quote on something give us a call at 1-877-566-0326 Ask for Sarah or Dane. Or email us at sales@wcsjobshop.com.

]]>
/examples/welding-in-lincoln-nebraska/feed/ 0
Welding Small parts /examples/fabrication-examples/welding-small-parts/?utm_source=rss&utm_medium=rss&utm_campaign=welding-small-parts /examples/fabrication-examples/welding-small-parts/#comments Sat, 30 Jun 2012 14:48:43 +0000 /?p=814 Jim Tig welding a frame for a Jack that one of our customers has designed.

Weld shop in Lincoln Nebraska at Waterjet Cutting Specialists

If you look at these pictures you can see Sarah in a red dress. what is she thinking she should have had someone else do that.  Are shop is clean but a dress like that is way to nice to the weld shop.

[nggallery id=2]

We are a Job shop located in Lincoln Nebraska. We are right in the center of the country. We have many different things we can do for you. Some of our equipment include CNC Machining centers, CNC Turning Centers, CNC Saws, 4000 watt Laser 5′ x 10′, Water Jet 6′ x 12′, 12′ CNC Press Brake 250 ton, and many more. We also have in-house powder coating, Welding and an assembly dept. If you would like to get a quote on something give us a call at 1-877-566-0326 Ask for Sarah or Dane. Or email us at sales@wcsjobshop.com.

]]>
/examples/fabrication-examples/welding-small-parts/feed/ 0
Our Welding Shop is Very Capable /examples/fabrication-examples/welding/?utm_source=rss&utm_medium=rss&utm_campaign=welding /examples/fabrication-examples/welding/#comments Tue, 19 Jun 2012 20:57:42 +0000 /?p=615 We have Welders on Staff. Some of them are Certified now. Some have been certified in the past. Most are Certifiable!

The Waterjet Cutting Specialists Welding Shop in Lincoln Nebraska

utilizes all of the standard welding techniques such as tig, mig, arc, oxygen acetylene, brazing and soldering.  We perform precision fabrication of large Machines and small-scale projects.  The Welding Department  is also capable of repairing most metal items both large and small. In addition to welding,

Our shop is equipped with machinery and tools

to cut and shape different metals to your specifications prior to welding. The experienced staff provides advice and estimates. For questions or project estimates Sarah Martin

[nggallery id=1]

]]>
/examples/fabrication-examples/welding/feed/ 0
Eiffel Tower Cut with Laser and Welded Metal Art /metal-art/eiffel-tower-cut-with-laser-and-welded-metal-art/?utm_source=rss&utm_medium=rss&utm_campaign=eiffel-tower-cut-with-laser-and-welded-metal-art /metal-art/eiffel-tower-cut-with-laser-and-welded-metal-art/#comments Mon, 11 Jun 2012 16:32:23 +0000 /?p=535 Laser Cutting and Welding Services

This is an example of some of the metal art that we have created.

This is a copy of the Eiffel Tower that is about 24″ tall. it was cut out of 7 ga stainless steel with our Laser cutting services. Then Welded together in our welding department. This is on showcase at our manufacturing facility in Lincoln Nebraska. We have Many other jobs that we do that are really a mixture between industrial art, metal art, and just plain art. We are often working with Architecture firms and welcome the chance to bid on this kind of work.
Eiffel Tower 24 inch tall laser cut out of stainless steel and welded shown next to grass in drive way Eiffel Tower 24 inch tall laser cut out of stainless steel and welded Eiffel Tower 24 inch tall laser cut out of stainless steel and welded Eiffel Tower 24 inch tall laser cut out of stainless steel and welded Eiffel Tower 24 inch tall laser cut out of stainless steel and welded of stainless steel and welded close up of tower Eiffel Tower 24 inch tall cut with laser cut out of stainless steel and welded Eiffel Tower 24 inch tall laser cut out of stainless steel and welded Eiffel Tower 24 inch tall laser cut out of stainless steel and welded Eiffel Tower 24 inch tall cut with laser cut out of stainless steel and welded then weld cleaned

]]>
/metal-art/eiffel-tower-cut-with-laser-and-welded-metal-art/feed/ 0
I Am a Man – Tribute to Standing Bear Art /examples/i-am-a-man-tribute-to-standing-bear-art/?utm_source=rss&utm_medium=rss&utm_campaign=i-am-a-man-tribute-to-standing-bear-art /examples/i-am-a-man-tribute-to-standing-bear-art/#comments Mon, 11 Jun 2012 01:14:03 +0000 /?p=526 Thanks for the awesome job!

Just hung the exhibition yesterday and this is “I Am a Man – Tribute to Standing Bear” that you cut for me:)

Water jet Cut out of Glass

Water jet Cut Art

I Am a Man-Tribute to Standing Bear. This was water jet cut out of glass that a local artist created.

 

This was  Water jet Cut out of Glass that Carrie Strope Sohayda a Local artist made.

She then put this beautiful art piece together and was on display  in the Governors Mansion of Nebraska. With our water jet we are able to cut all kinds of material that conventional machining or cutting techniques would not allow.

Carrie Sohayda www.calyxglass.com
“I work with glass integrating different techniques, including mosaic, kiln-formed (or fused) glass, glass painting and stained glass. I enjoy experimenting with and combining various techniques and processes, using them to add new facets to my work. I am influenced by intricate geometric designs and color exploration, incorporating a love for quilting, textiles and bright colors inherited from my mother, who was an avid quilter. I love the meditation of breaking glass into many pieces, building them together into a new form. I enjoy that kilnformed glass can be a challenge. There’s always a chance for surprises and accidents. When the kiln lid closes, the glass can shift as it changes from a solid to a liquid and back. The transformative and independent nature of kiln-formed glass and its lessons of detachment have helped me evolve not only as an artist but also as a person, and makes me want to share glass as a medium with as many people as possible.”

We can cut basically any material up to about 6″ thick. We can cut aluminum, stainless steel, hardened tool steels, mild steel, ceramics, glass, tile, wood, plastic, stone, rubber, foam, insulation, and just about anything else you can imagine.

 

]]>
/examples/i-am-a-man-tribute-to-standing-bear-art/feed/ 1
5 axis Machining example /examples/machining-examples/5-axis-machining-example/?utm_source=rss&utm_medium=rss&utm_campaign=5-axis-machining-example /examples/machining-examples/5-axis-machining-example/#comments Sun, 10 Jun 2012 19:23:54 +0000 /?p=505 Machining of Plastic Clamps very aggressively

dual spindle 5 axis Trunnion table.

This is being done on a Haas VF4SS. We are running 4 of the clamps at a time.

www.wcsjobshop.com

We are a Job shop located in Lincoln Nebraska. We are right in the center of the country. We have many different things we can do for you. Some of our equipment include CNC Machining centers, CNC Turning Centers, CNC Saws, 4000 watt Laser 5′ x 10′, Water Jet 6′ x 12′, CNC Press Brake 250 ton, and many more. We also have in house powder coating, Welding and an assembly dept. If you would like to get a quote on something give us a call at 1-877-566-0326 Ask for Sarah or Dane. Or email us at sales@wcsjobshop.com.

]]>
/examples/machining-examples/5-axis-machining-example/feed/ 0
Stainless Steel Parts cut and Bent for a customer. /examples/fabrication-examples/stainless-steel-parts-cut-and-bent-for-a-customer/?utm_source=rss&utm_medium=rss&utm_campaign=stainless-steel-parts-cut-and-bent-for-a-customer /examples/fabrication-examples/stainless-steel-parts-cut-and-bent-for-a-customer/#comments Sun, 10 Jun 2012 19:16:38 +0000 /?p=491 Stainless Steel Parts Laser cut, bent, and prepared for shipping

This is an example of how we can separate parts for a customer as we are manufacturing the parts

First we used our Laser cutting Machine to cut the parts out of sheets of Stainless steel. The next step is to orginize them to go to one of our Press Brakes for this job we used a CNC Press brake. Our Programmer has already put in all of the solidworks Models into our ERP system and we have created QC Drawings. We Program the Press brake with this information. Since we are only bending a few of each part special attention is paid to make sure the the very first part comes out of the Laser and Press Brake right. Once the parts have been Bent we QC the bending and then carefully prepare the parts for shipping.

]]>
/examples/fabrication-examples/stainless-steel-parts-cut-and-bent-for-a-customer/feed/ 0
I am Very impressed by the work that WCS did /testimonials/i-am-very-impressed-by-the-work-that-wcs-did/?utm_source=rss&utm_medium=rss&utm_campaign=i-am-very-impressed-by-the-work-that-wcs-did /testimonials/i-am-very-impressed-by-the-work-that-wcs-did/#comments Sun, 10 Jun 2012 15:22:03 +0000 /?p=487 I am Very impressed by the work that WCS did on powder coating our foul poles. Excellent work, timely delivery time, and all around top notch job.

Gary Young, Blackhawk Baseball, Lincoln, Nebraska

]]>
/testimonials/i-am-very-impressed-by-the-work-that-wcs-did/feed/ 0